EKO 3D ADDITIVE

EKO Modifiers, Bases and Additives are to be used with the EKO PVC Free ink system. All modifiers and additives are PVC Free and are compliant with all known RSL and regulatory requirements. Use no more than the maximum amount specified.

Instructions:

Used at 10% in EKO ink mixes to create high build for printing 3D images. We recommend using 250 to 400 micron capillary film on screens depending on desired image height. Once mixed into the EKO mixture, it should be printed through 83 - 110 MC. IN. (32 - 43 MC. CM.)

Disclaimer: Not all Rutland products are available in every country. Please check with your local representative for availability. The data presented in this leaflet are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose.

Product Overview:

Brand: Rutland
Product Code: RS0053
Industry: Inks
Application: Screen Printing
Category: Modifier/Additives
Sub Category: High Density
Chemistry: EKO
Substrate(s): Other
Certification(s): ISO9001

Squeegee:

Angle: 10° - 20°

Screen:

Mesh: 110
Emulsion Types: Direct, Non-phthalate compliant
Cleanup: Press Wash or Ink Degrader

Storage:

Storage Notes: Avoid direct heat or sun.