EKO MATTE ADDITIVE

EKO Modifiers, Bases and Additives are to be used with the EKO PVC Free ink system. All modifiers and additives are PVC Free and are compliant with all known RSL and regulatory requirements. Use no more than the maximum amount specified.

Instructions:

Add up to 3% to EKO mixed colors to produce a matte finish or up to 15% to make a Puff ink. Note: Puff ink will have less film strength than standard EKO inks. Make sure it meets your durability expectations prior to running production runs.

Disclaimer: Not all Rutland products are available in every country. Please check with your local representative for availability. The data presented in this leaflet are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose.

Product Overview:

Brand: Rutland
Product Code: RS0055
Industry: Inks
Application: Screen Printing
Category: Modifier/Additives
Chemistry: EKO
Substrate(s): Other
Certification(s): ISO9001

Curing:

Fusion Temperature: 320°F

Squeegee:

Angle: 10° - 20°

Screen:

Mesh: 110
Emulsion Types: Direct, Non-phthalate compliant
Cleanup: Press Wash or Ink Degrader

Storage:

Storage Notes: Avoid direct heat or sun.