EKO Modifiers, Bases and Additives are to be used with the EKO PVC Free ink system. All modifiers and additives are PVC Free and are compliant with all known RSL and regulatory requirements. Use no more than the maximum amount specified.Instructions:
Used at 6 - 8% in EKO high build ink mixes to improve edge definition and fine line resolution of the 3D image. Addition of this product does not alter the print or cure properties of the EKO inks.Disclaimer: Not all Rutland products are available in every country. Please check with your local representative for availability. The data presented in this leaflet are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose.