LOW CURE PEACH

Features:

  • Rutland™ Low Cure inks are low bleed inks that can cure at a temperature as low as 270°F (132°C). They deliver great bleed resistance, allowing a direct-to-fabric print.
  • Wide cure temperature range from 270°F (132°C) to 320°F (160°C)
  • Excellent stretch properties
  • Direct-to-fabric printing with great bleed resistance
  • Non-migrating pigments
  • Soft hand
  • Compatible with manual and automatic presses

Instructions:

Use 86–230t (34-90t/cm) mesh screens for best performance and opacity. For best results, use a print-flash-print technique to ensure sufficient ink deposit on dark fabrics. For challenging polyester fabrics, use Rutland™ Low Cure Barrier Gray or Barrier Black as a base layer to achieve maximum bleed resistance. Adjust flash cure temperature and dwell time so ink is just dry to touch. Avoid excessive flash temperatures to protect fabric and migration of dyes. Depending on flash unit, a 3 - 5 second flash is adequate.

Test all prints for color fastness and print durability before starting.

Recommendation:

Rutland Plastic Technologies does not knowingly add plasticizers containing the phthalates listed and outlined in California Bill 1108, CPSIA HR-4040 and Oeko-tex Standard 100. The plasticizers identified may include di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl, and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the manufacture of High Opacity Non-Phthalate Inks. Rutland Plastic Technologies does not test the final product for amounts of the aforementioned phthalate plasticizers and esters and encourages all users to conduct testing for their intended use.

Disclaimer: Not all Rutland products are available in every country. Please check with your local representative for availability. The data presented in this leaflet are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose.

Product Overview:

Brand: Rutland
Product Code: LC7003
Industry: Inks
Application: Screen Printing
Category: Specialty Inks
Chemistry: Plastisol
Substrate(s): Blends, Poly
Best Used By: 12 months

Curing:

Fusion Temperature: 270°F

Performance:

Bleed Resistance: Excellent

Squeegee:

Profile: Square
Angle: 10° - 20°
Speed: Medium

Screen:

Mesh: 86 to 230
Screen Tension: As recommended for mesh
Cleanup: Non-Phthalate screen wash

Storage:

Storage Notes: Avoid direct heat or sun.