Rutland Flame Retardant Plastisol (made by adding 7.5 to 10% of our Flame Retardant Additive ) is a self-extinguishing material if the ink has been properly fused. However, it is up to the printer to have the composite of the flame retardant garment and the flame retardant ink tested and certified as a unit to pass the appropriate burn test. Rutland can state only the flame resistance of our Flame Retardant plastisol product or the product if mixed with proper ratio of Flame Retardant additive. We cannot guarantee that it will Flame Retard the textile article that it may be printed onto. Rutland cannot guarantee the Flame Resistance of the plastisol if it has been modified, diluted or blended with other products before printing. The mixing of the proper ratio of Rutland’s M00023 Flame Retardant Additive into Rutland’s Non-phthalate opaque printing inks should be self extinguishing. Some settling will occur with time. STIR THIS PRODUCT COMPLETELY BEFORE USE. This product qualifies as a non-phthalate modifier and would test as such if mixed with all non-phthalate plastisol products.


Rutland Plastic Technologies does not knowingly add plasticizers containing the phthalates listed and outlined in California Bill 1108, CPSIA HR-4040 and Oeko-tex Standard 100. The plasticizers identified may include di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl, and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the manufacture of Rutland™ High Opacity Non-Phthalate Inks. Rutland Plastic Technologies does not test the final product for amounts of the aforementioned phthalate plasticizers and esters and encourages all users to conduct testing for their intended use.

Disclaimer: Not all Rutland products are available in every country. Please check with your local representative for availability. The data presented in this leaflet are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose.

Product Overview:

Brand: Rutland
Product Code: M00023
Industry: Inks
Application: Screen Printing
Category: Modifier/Additives
Chemistry: Plastisol
Substrate(s): Other
Best Used By: 12 months
Certification(s): ISO9001


Angle: 10° - 20°


Mesh: 110
Cleanup: Press Wash or Ink Degrader


Storage Notes: Avoid direct heat or sun.