EG0280 NPT Super Gel is formulated as a plastisol for printing on 100% Cotton fabrics or over a low bleed underlay on poly/cotton. This product has excellent edge definition when stacked for that 3D look and provides maximum gloss when fully cured. The product is designed to function as a clear for over coat in its finished state and as a Super Gel Clear once 2% M00004 Liquid Thickener is added. See mix instructions below. Fast shearing action means higher press speeds. Can be tinted with up to 30% C3 Color Boosters to make Gel Colors. High gloss and clarity when printed in thick film and cured properly.Instructions:
EG0280 requires thickening before printing as a Gel. To obtain the thick body gel mix in 2% of M00004 Liquid Thickener. Mix in thoroughly with a mechanical mixer. Allow the mix to sit for 2 hours before printing to obtain the full body. Print EG0280 directly onto substrates or over an underlay. EG0280 is normally printed through mesh ranges from 86-110 mc in (34-43 mc cm) You may print through finer mesh to achieve fine details with less height. Recommend 60 Durometer squeegee and thick film emulsion for superior edge definition when stacking. For higher gloss, cure at slightly higher temperature for longer times.Recommendation:
Do not dry clean, bleach, or iron the printed image. Note: This is not a low bleed ink. Do not print on polyester fabrics. Bases, modifiers and additives should be mixed in clean vessels using clean mixer blades and utensils. Any contamination from other ink sources or non approved additives could test positive for the restricted phthalates.Statement:
Rutland Plastic Technologies does not knowingly add plasticizers containing the phthalates listed and outlined in California Bill 1108, CPSIA HR-4040 and Oeko-tex Standard 100. The plasticizers identified may include di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl, and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the manufacture of Claira High Opacity Non-Phthalate Inks. Rutland Plastic Technologies does not test the final product for amounts of the aforementioned phthalate plasticizers and esters and encourages all users to conduct testing for their intended use.Disclaimer: Not all Rutland products are available in every country. Please check with your local representative for availability. The data presented in this leaflet are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose.