EH9075 NPT Cotton White is opaque resulting in excellent coverage on dark garments. The low tack formula allows printing through finer mesh counts without the need for a viscosity modifier. Use as an underlay where good opacity is needed or as a stand-alone white.Creamy, short body plastisol for easy printing.Low tack formula for fast shear action.
Print EH NPT Cotton White straight from the container. EH NPT Cotton White is user friendly and may be printed through mesh ranging from 86 to 230 mc in (34 to 90 mc cm) without modification of the viscosity. The tack free formulation allows increased coverage; therefore use finer mesh counts for the softest hand and good opacity.Recommendation:
Do not dry clean, bleach, or iron the printed image.Statement:
Rutland Plastic Technologies does not knowingly add plasticizers containing the phthalates listed and outlined in California Bill 1108, CPSIA HR-4040 and Oeko-tex Standard 100. The plasticizers identified may include di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl, and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the manufacture of Claira High Opacity Non-Phthalate Inks. Rutland Plastic Technologies does not test the final product for amounts of the aforementioned phthalate plasticizers and esters and encourages all users to conduct testing for their intended use.Disclaimer: Not all Rutland products are available in every country. Please check with your local representative for availability. The data presented in this leaflet are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose.