NPT JEWEL SILVER TONE

ES NPT Jewel Tone is formulated as a press-ready plastisol for printing on 100% Cotton or poly/ cotton. The NPT Jewel Tone Silver can be colored to produce an array of metallic colors.

Features:

  • Short body and very low tack for easy printing.
  • Non-phthalate formulation to comply with new regulations restricting phthalates.
  • No viscosity modifications necessary.
  • Can be tinted with upto 5% C3 color boosters to make metallic colors.
  • Extreme high luster when printed.

Instructions:

NPT Jewel Tone requires stirring before printing. Print directly onto substrates. NPT Jewel Tone is normally printed through mesh ranges from 86 - 110 mc in ( 34 - 43 mc cm). Recommend a medium Durometer squeegee for maximum coverage. Print with heavy pressure, allowing the base to penetrate the fibers for the most brilliant prints. NPT Jewel Tone will not tarnish. For maximum durability and wash fastness, insure a full cure of 320ºF (160°C.). Metallic inks require longer dwell times than standard inks to achieve a proper cure.

Recommendation:

Do not dry clean, bleach or iron the printed image.

Disclaimer: Not all Rutland products are available in every country. Please check with your local representative for availability. The data presented in this leaflet are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose.

Product Overview:

Brand: Rutland
Product Code: ES0050
Industry: Inks
Application: Screen Printing
Category: Specialty Inks
Chemistry: Plastisol
Substrate(s): Blends, Cotton
Best Used By: 12 months
Certification(s): ISO9001

Curing:

Fusion Temperature: 320°F
Gel Point: 160°F

Performance:

Viscosity: Medium
Coverage: High Opacity
Printability: Excellent
After Flash Tack: Medium

Squeegee:

Profile: Square
Type: Polyurethane
Angle: 10° - 20°

Screen:

Mesh: 86 to 110
Emulsion Types: Capillary film, Direct

Storage:

Storage Temperature: 65°F - 95°F (18°C - 35°C)