EP Series NPT LB White Puff was developed as a direct print puff to maintain whiter white better than mixing using concentrates and puff base.
EP0004 Natural Puff Base is designed to allow up to 50% C3 Color Boosters or M3 Color mixing inks to be added and still maintain a good puff of the mixed color. Use as little colorant as possible for the highest puff. Tip: ( Add thickener to the premixed puff color to allow more ink to sit on surface giving maximum loft)Instructions:
Print EP Series Puff White on 100% Cotton. For best results print Puff through a 60 mc in (24 mc cm) mesh count. Finer mesh counts may be used when printing on top of other inks, such as High Density, to give a soft puff high light.Disclaimer: Not all Rutland products are available in every country. Please check with your local representative for availability. The data presented in this leaflet are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose.