NPT LITE GREEN LUMINESCENCE

ES3101 NPT Luminescent Base is formulated as a press-ready plastisol for printing on 100% Cotton. It gives a glow in the dark effect when applied to textiles. It glows a pale yellow/green.Short body and very low wet tack for easy printing.Fast shearing action means higher press speeds.Can be tinted with up to 5% C3 Fluorescent Color Boosters to make Glow in Dark Colors.

Features:

  • Non-Phthalate formulation to comply with new regulations restricting phthalates.

Instructions:

ES3101 requires stirring before printing.. Print directly onto substrates or over a white underlay. ND3101 is normally printed through mesh ranges from 86-156 mc in (34-62 mc cm) The Glow last 20 to 30 minutes and recharges instantly when exposed to a light source.

Recommendation:

Do not dry clean, bleach, or iron the printed image. Note: This is not a low bleed ink. Do not print on polyester fabrics. Claira Colors™, bases, modifiers and additives should be mixed in clean vessels using clean mixer blades and utensils. Any contamination from other ink sources or non approved additives could make Claira Colors™ test positive for the restricted phthalates.

Statement:

Rutland Plastic Technologies does not knowingly add plasticizers containing the phthalates listed and outlined in California Bill 1108, CPSIA HR-4040 and Oeko-tex Standard 100. The plasticizers identified may include di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl, and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the manufacture of Claira High Opacity Non-Phthalate Inks. Rutland Plastic Technologies does not test the final product for amounts of the aforementioned phthalate plasticizers and esters and encourages all users to conduct testing for their intended use.

Disclaimer: Not all Rutland products are available in every country. Please check with your local representative for availability. The data presented in this leaflet are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose.

Product Overview:

Brand: Rutland
Product Code: ES3101
Industry: Inks
Application: Screen Printing
Category: Specialty Inks
Chemistry: Plastisol
Substrate(s): Cotton
Best Used By: 12 months
Certification(s): ISO9001

Curing:

Fusion Temperature: 320°F
Gel Point: 160°F

Performance:

Viscosity: Medium
Coverage: Medium Opacity
After Flash Tack: Medium

Squeegee:

Profile: Square
Type: Polyurethane
Angle: 10° - 20°
Speed: Medium/High

Screen:

Mesh: 86 to 156
Screen Tension:
Underlay: NPT Whites
Emulsion Types: Capillary film, Direct
Cleanup: Bio-degradable screen wash

Storage:

Storage Temperature: 65°F - 95°F (18°C - 35°C)
Storage Notes: Avoid direct sun.