EL9230 NPT LB Maximum White is formulated as low bleed, press-ready plastisol for printing on polyester/cotton dark fabrics. This product is excellent for printing through a variety of mesh ranges.


  • Great opacity with quick flash.
  • User friendly, no viscosity modifiers necessary.
  • Creamy, short body plastisol for easy printing.
  • Tack free formulation for fast shearing action.
  • Optically brightened to produce maximum whiteness and brightness.
  • Excellent bleed resistance.


Print EL9230 directly onto 50/50 substrates to obtain ultimate opacity and bleed resistance. EL9230 may be applied as an underlay white when printed through mesh ranges 86 - 320 mc. in (34-125 mc. cm.) to achieve very fine details like very fine details and halftones, or can be printed as a stand alone white for maximum whiteness. The quick flash characteristics of this product allows it to function either way. EL9230 Maximum White is recommended for polyester/cotton blends.

Note to 100% Cotton users: 100% Cotton could have a ghost image appear if printed with low bleed inks. EL9230 4PT Maximum White is a low bleed ink and should not be printed on 100% Cotton. EL9230 Maximum White is recommended
for polyester/cotton blends.


Do not dry clean, bleach, or iron the printed image.


Rutland Plastic Technologies does not knowingly add plasticizers containing the phthalates listed and outlined in California Bill 1108, CPSIA HR-4040 and Oeko-tex Standard 100. The plasticizers identified may include di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl, and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the manufacture of Claira High Opacity Non-Phthalate Inks. Rutland Plastic Technologies does not test the final product for amounts of the aforementioned phthalate plasticizers and esters and encourages all users to conduct testing for their intended use.

Disclaimer: Not all Rutland products are available in every country. Please check with your local representative for availability. The data presented in this leaflet are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose.

Product Overview:

Brand: Rutland
Product Code: EL9230
Industry: Inks
Application: Screen Printing
Category: White Inks
Chemistry: Plastisol
Substrate(s): Blends
Best Used By: 12 months
Certification(s): ISO9001


Fusion Temperature: 320°F
Gel Point: 165°F


Viscosity: High
Coverage: High Opacity
After Flash Tack: Low
Bleed Resistance: Excellent


Profile: Square
Type: Polyurethane
Angle: 10° - 20°


Mesh: 86 to 320
Cleanup: Bio-degradable screen wash


Storage Temperature: 65°F - 95°F (18°C - 35°C)
Storage Notes: Avoid direct sun.