NPT REFLECTIVE GREY MAX

ER NPT Reflective  series  has the  highest  reflectivity  among  all Rutland  reflective  plastisols and is designed for printing through 86­110 mc in (34­43 mc cm) mesh count onto white, light and dark 100% cotton fabrics. Excellent reflectivity for safety applications. Unwashed candle power is approximately 11 Candelas / Lux / square meter. Washed candle power is approximately 23 Candelas / Lux / Square meter. Note: the candle power may vary dependent upon the amount of pressure applied when printing. Non-Phthalate formulation to comply with new regulations restricting phthalates.

Features:

  • Press ready reflective plastisol for printing on white and dark fabrics.
  • User friendly, single component plastisol.  Excellent adhesion characteristics and wash fastness.
  • Reflective properties are comparable to currently marketed direct print products.

Instructions:

Direct Print ER NPT Reflective Ink onto  light or dark  substrates through  86­110 mc in  (34­43 mc  cm) mesh  using medium to  hard  squeegee, and  HARD  PRINT PRESSURE. This will insure maximum base penetration into garment fiber, leaving the reflective media  on  the surface giving  maximum candelas/ Lux / Square meter.  Do not print over an underlay nor print flash print this product. 
Print technique:
• Load ink into mesh opening with hard, sharp squeegee.
• Only the image area should be filled with ink.
• Transfer ink to the fabric surface with a heavy squeegee pass

Disclaimer: Not all Rutland products are available in every country. Please check with your local representative for availability. The data presented in this leaflet are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose.

Product Overview:

Brand: Rutland
Product Code: ER0301
Industry: Inks
Application: Screen Printing
Category: Specialty Inks
Sub Category: Reflective
Chemistry: Plastisol
Substrate(s): Blends, Cotton
Certification(s): ISO9001

Curing:

Fusion Temperature: 320°F
Gel Point: 160°F

Performance:

Viscosity: Medium
Finish: Reflective
Coverage: High Opacity
Printability: Great

Squeegee:

Profile: Square
Type: Polyurethane
Angle: 10° - 20°

Screen:

Mesh: 86 to 110
Emulsion Types: Capillary film, Direct

Additives:

Extender: M00001 Viscosity Reducer

Storage:

Storage Temperature: 65°F - 95°F (18°C - 35°C)
Storage Notes: Cool dry area. Avoid direct sun.