EG0290 is formulated as a plastisol for printing on 100% Cotton fabrics. This product has excellent clarity and gloss when printing as a 3D type gel. It gives flowing rounded edges with no appearance of screen marks. It can be thickened with M00004 Liquid Thickener to produce the more traditional Gel with sharper edges. Short body and very low wet tack for easy printing. Fast shearing action means higher press speeds. Can be tinted with up to 30% Color Boosters to make Gel Colors. High gloss when cured under standard conditions.


  • Non-Phthalate formulation to comply with new regulations restricting phthalates.


Print EG0290 directly onto substrates or over an underlay. It is normally printed through mesh ranges from 86-110 t/in. (34-43 t/cm.). Recommend 60 or 70 Durometer squeegee and thick film emulsion for printing a 3D image.


Do not dry clean, bleach, or iron the printed image.


Rutland Plastic Technologies does not knowingly add plasticizers containing the phthalates listed and outlined in California Bill 1108, CPSIA HR-4040 and Oeko-tex Standard 100. The plasticizers identified may include di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl, and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the manufacture of Rutland™ High Opacity Non-Phthalate Inks. Rutland Plastic Technologies does not test the final product for amounts of the aforementioned phthalate plasticizers and esters and encourages all users to conduct testing for their intended use.

Disclaimer: Not all Rutland products are available in every country. Please check with your local representative for availability. The data presented in this leaflet are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose.

Product Overview:

Brand: Rutland
Product Code: EG0290
Industry: Inks
Application: Screen Printing
Category: Specialty Inks
Sub Category: Gel
Chemistry: Plastisol
Substrate(s): Cotton
Best Used By: 12 months
Certification(s): ISO9001


Fusion Temperature: 320°F
Gel Point: 155°F


Viscosity: Medium
Coverage: Low Opacity
After Flash Tack: Medium


Profile: Square
Type: Polyurethane
Angle: 10° - 20°
Speed: Medium/High


Mesh: 86 to 110
Underlay: Depending on the fabric
Emulsion Types: Capillary film, Direct
Cleanup: Press Wash or Ink Degrader


Storage Temperature: 65°F - 95°F (18°C - 35°C)
Storage Notes: Avoid direct sun.