NPT SUPER POLY WHITE

EL9746 NPT Super Poly White is formulated as a press-ready non-phthalate low bleed plastisol white for printing on 100% Polyester. NPT Super Poly White has great dye migration resistance. For severe bleeding fabrics we suggest EL0266 Barrier Base (Grey) as an under base for maximum protection against dye migration.

Features:

  • Short body for easy printing.
  • Fast shearing action means higher press speeds.
  • Great low bleed qualities for printing on 100% polyester.
  • Will not bleach out colors that are printed over top when used as an underlay.

Instructions:

Print directly onto 100% Polyester substrates. NPT Super Poly White is normally printed through mesh ranges from 86-156 mc in. (34-62 mc. CM.) Recommend 70-80 Durometer squeegee with sharp edge for maximum definition. Proper cure is achieved when garment reaches 320ºF (160°C.). NOTE: Poorly dyed polyester or too much heat in the curing process can overcome any low bleed inks ability to block the migration. For severe migration use ES0266 Barrier Base as an underlay. *Note to 100% Cotton users: 100% Cotton could have a ghost image appear if printed with low bleed inks. EL9746 Super Poly White is a low bleed ink and should not be printed on 100% Cotton. EL9746 Super Poly White is recommended for polyester or polyester/cotton blends.

Recommendation:

Do not dry clean, bleach, or iron the printed image.

Statement:

Rutland Plastic Technologies does not knowingly add plasticizers containing the phthalates listed and outlined in California Bill 1108, CPSIA HR-4040 and Oeko-tex Standard 100. The plasticizers identified may include di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl, and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the manufacture of Claira High Opacity Non-Phthalate Inks. Rutland Plastic Technologies does not test the final product for amounts of the aforementioned phthalate plasticizers and esters and encourages all users to conduct testing for their intended use.

Disclaimer: Not all Rutland products are available in every country. Please check with your local representative for availability. The data presented in this leaflet are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose.

Product Overview:

Brand: Rutland
Product Code: EL9746
Industry: Inks
Application: Screen Printing
Category: White Inks
Chemistry: Plastisol
Substrate(s): Poly
Best Used By: 12 months
Certification(s): ISO9001

Curing:

Fusion Temperature: 320°F
Gel Point: 160°F

Performance:

Viscosity: High
Coverage: High Opacity
After Flash Tack: Low
Bleed Resistance: Great for 100% Polyester

Squeegee:

Profile: Square
Type: Polyurethane
Angle: 10° - 20°
Speed: Medium/High

Screen:

Mesh: 86 to 156
Underlay: EL0266 Barrier Base (Grey)
Emulsion Types: Capillary film, Direct
Cleanup: Non-Phthalate screen wash

Storage:

Storage Temperature: 65°F - 95°F (18°C - 35°C)
Storage Notes: Avoid direct sun.