Mix up to 5% EA 0022 NPT Tack Free additive into an NPT ink to reduce the wet ink tack for easier printing and the after tack (Hot Tack) after a flash. Adding NPT Tack Free additive will reduce the bleed characteristics of Low Bleed inks and increase the flash cure time depending on how much is used.Disclaimer: Not all Rutland products are available in every country. Please check with your local representative for availability. The data presented in this leaflet are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose.