SILEXTREME BARRIER BLACK PART B

SILEXTREME BARRIER BLACK is a 3-part mixture. Mix 80% of SX0996 Barrier Clear Part A with 20% of SX0997 Barrier Black Part B first. Then add 5% SX0515 SILEXTREME CATALYST by weight of the ink, thoroughly mix and you are ready to print. SILEXTREME BARRIER BLACK is used on 100% polyester and other difficult fabrics. SILEXTREME RFU colors can be printed directly on top of SILEXTREME BARRIER BLACK after it has been flashed. The composite print will have a high degree of stretch and durability in the wash process. It exhibits an extremely supple hand. A low cure temperature is another plus for this product series.. SILEXTREME inks are printable on both manual and automatic printing presses. SILEXTREME inks can be ironed without re-melting the ink film, unlike other types of ink.

Features:

  • Flexible ink film with outstanding stretch and resistance to cracking.
  • Very good supple print with great hand and drapability.
  • No PVC, no lead, no phthalates, no formaldehyde, no APEO's
  • Passes major brand durability testing including 5 x 60 wash test.

Instructions:

Only catalyze enough for up to 1 day of print production as the catalyst creates a pot life. For extreme hot shop conditions, SILEXTREME retarder can be used at 0.5-3% to extend the screen open life of the catalyzed inks. For maximum opacity and brilliance of the colors, use print - flash - print method.

Recommendation:

SILEXTREME inks require 4-6 seconds of flash time when pallets have been preheated and will cure when the ink film reaches 260F, generally seen when passing through oven with a minimum of 60 second dwell time. For maximum stretch-ability, a thicker ink layer must be built up, specifically when printing on high spandex stretch or compression fabrics. Certain chemicals in dyes and fabric finishes can poison the cure of silicone inks. Sulphur, amines various antimicrobials, and some textile finishes may affect cure and adhesion of silicone inks. Always test prints before running full production to ensure proper cure and effect. Difficult fabrics like 100% Polyester, sublimated (camouflage) polyesters,etc. may require the use of SILEXTREME BLACK BARRIER as a first down base.

Disclaimer: Not all Rutland products are available in every country. Please check with your local representative for availability. The data presented in this leaflet are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose.

Product Overview:

Brand: Rutland
Product Code: SX0997
Industry: Inks
Application: Screen Printing
Category: Specialty Inks
Sub Category: Barrier
Chemistry: Silicone
Substrate(s): Poly
Best Used By: 12 months

Curing:

Fusion Temperature: 270°F
Fusion Time: 4-6 seconds seconds

Performance:

Finish: Matte Finish
Coverage: High Opacity
Printability: Excellent
After Flash Tack: Low
Bleed Resistance: Excellent

Screen:

Mesh: 110
Emulsion Types: Non-phthalate compliant
Cleanup: Press Wash or Ink Degrader

Additives:

Thinner: SX0514 SXT Viscosity Reducer

Storage:

Storage Temperature: 65°F - 95°F (18°C - 35°C)
Storage Notes: Avoid direct heat or sun.